XC9702

SMALL BUCK DC/DC CONVERTER FOR INDUSTRIAL APPLICATIONS

60V 300mA Synchronous Step-Down DC/DC Converter, Topr≤125ºC

 

KEY FEATURES:

  • Wide Input Voltage Range
    • Up to 60V (66V Ab. Max.)
    • Supports high step-down ratio.

     

  • Wide Operating Temperature Range
    • -40ºC to 125ºC
    • Thermal Shutdown @ 160ºC

     

  • Switch between PWM and PWM/PFM operation using the MODE pin

     

  • Low Current Consumption
    • Only 12 μA Quiescent Current
    • 0.8 μA in Standby Mode

     

  • Space Saving Solution
    • Ultra-small Package (2.6 x 2.9 x 0.6mm)
    • Small Coil Size (2.5 × 2.0 × 1.2mm)
    • Replace inefficient Linear Regulators

 

KEY ELECTRICAL PARAMETERS:

 SERIES XC9702 
IOUT 300 mA

ON Resistance (Typ.)

N-Ch
0.90 Ω
N-Ch 0.49 Ω
VIN Range 4.5 V ~ 60 V
VOUT Range 2.5 V ~ 12.0 V
FB Voltage  0.75 V ±1.5%
Switching Frequency 1.0MHz
Operation Mode PWM (MODE=”H”)
PWM/PFM (MODE=”L”)
Quiescent Current (Typ.)  12 μA
Standby Current (Typ.)    0.8 μA
Protection Functions Current Limit (Foldback)
Output Over Voltage Protection
Lx short protection
Thermal Shutdown (160 ºC)
Other Functions Adjustable Soft-Start
Power Good
Inductor Value 22 μH ~ 100 μH
Amb. Op. Temp. Range -40 ~ 125 ºC
Standard Packages USP-10B or HSOP-8N
Smallest Package (mm) 2.6 x 2.9 x 0.6mm

 

TYPICAL APPLICATION CIRCUIT

 

 

 

PCB LAYOUT

 

 

EFFICIENCY vs. OUTPUT CURRENT

RIPPLE VOLTAGE VS. OUTPUT CURRENT

 

CIN=4.7μF (GCM32DC72A475KE02L), CL=44μF (GRM21BD71A226ME44L x 2)

 

APPLICATION BLOCK DIAGRAM FOR SMALL INDUSTRIAL SENSORS

12V/24V TO 5.0V, THEN TO 3.3V

 

 

 

  • Control the sequence of the subsequent power supply with the PG of the XC9702.
  • Supervise 12V/24V power voltage with XC6138N and monitor output to MCU.

 

12V/24V DIRECTLY TO 3.3V

 

 

The control method can be changed dynamically with the MODE pin.

  • MODE “H” = PWM ⇒ Low noise (For sensors, etc.)
  • MODE “L” = PWM/PFM ⇒ High efficiency at light load

 

 

PACKAGE AND PIN-OUT

 

DOWNLOAD FULL PRESENTATION HERE