Products - Step-Down

XC6365 PWM Step-Down DC/DC Controller

PWM Step-Down DC/DC Controller image


Property XC6365
Output Current 1000mA
Input Voltage 2.2 ~ 10V
Output Voltage 1.5 ~ 6.0V
Oscillation Frequency 300kHz
Quiescent Current 57µA
Packages SOT-25, USP-6C

Product Description

PWM Step-Down DC/DC Controller

This part is not recommended for new designs, please use XC9220


The XC6365 series are multi-functional step-down DC/DC controllers with built-in high speed, low ON resistance drivers. An output current of more than 1A is possible using an externally connected transistor, coil, diode and capacitor. 

Output voltage is programmable in 100mV steps between 1.5V to 6.0V (VOUT) (±2.5% accuracy). Further, with 1.0V of standard voltage supply internal and using externally connected components, output voltage can be set up freely (FB). With a 300kHz switching frequency, the size of the external components can be reduced.

The XC6365 uses fixed frequency PWM mode and deliveres maximum efficiencies at larger output currents. In relation to soft-start time, both internally set-up 10msec types (A,B) and external resistor or capacitor regulated types (C,D) are available. During stand-by time (CE pin "Low" ), current consumption is reduced to less than 0.5μA. With U.V.L.O internal, the external Tr. will be forcibly switched off if used below the stipulated voltage.


  • Input Voltage Range: 2.2V~10V
  • Output Voltage Range: 1.5V ~ 6.0V (100mV steps)
  • Switching Frequency: 180kHz, 300kHz or 500kHz
  • Output Current: >1.0A
  • High Efficiency: 92% (typ.)
  • Stand-by Capability: ISTB=0.5μA (max.)
  • Soft-start time can be set-up externally