XC9128 Series

0.8V Synch Step-Up DC/DC Converter

• Step-up from 0.8V Single Cell 
• PWM or PWM/PFM Auto Switching Control

The XC9128 series is a synchronous step-up DC/DC with a 0.2 Ohm (typ) N-channel driver transistor and a synchronous 0.2 Ohm (typ) P-channel switching transistor built-in and is capable of providing step-up solutions from inputs as low as 0.8V.

With a high switching frequency of 1.2MHz, a small inductor can be used making the XC9128 ideally suited to applications with limited board space. Output voltage is externally set within a range of 1.8V~5.3V using a reference voltage supply of 0.45V and split resistors.

The MODE pin enables the user to select either fixed PWM control or PWM/PFM automatic switching control by sending a high or low signal to the pin.

The XC9128 series incorporates an AEN/ (Adaptor Enable) pin which allows the XC9128 to also be used to provide a fast power supply back-up solution when the IC is used together with added power sources such as AC adaptors. The AEN/ pin monitors the external power source and can quickly sense if that power supply fails, providing immediate back-up.
 

The series can be used with ceramic capacitors.

Features:

• Operating Voltage: 0.8V ~ 6.0V
• Output Voltage: 1.8V~ 5.3V (externally set)
• Output Current: 500mA (Vout=3.3V, Vin=1.8V)
• Switching Frequency: 1.2MHz
• Soft-Start Time: 5ms (typ)
• Thermal Shutdown & Integral Latch Protection
• Adaptor Enable Function (AEN/ pin)

Packages: MSOP-10 , USP-10B