XC2165 series

The XC2165 series are CMOS IC which operate from supply voltage range from 1.5V to 3.6V. With built-in crystal oscillator and divider circuits the output is selectable from any one of the following values for f0: f0/1, f0/2, f0/4, f0/8.

With oscillation capacitors and a feedback resistor built-in, it is possible to configure a stable fundamental oscillator using only a low cost standard external crystal.

In stand-by mode, oscillation stops completely and output pin Q0 becomes in the state of high impedance. The XC2165 series are integrated into SOT-26 packages. The series is also available in chip form.

Features:

Oscillation Frequency:

  • C2xA series  8MHz ~ 70MHz (Fundamental)
  • C2xB series 16MHz ~ 120MHz (Fundamental)

Divider Ratio: Selectable from f0/1, f0/2, f0/4, f0/8
Output: 3-State
Operating Voltage: 1.5V ~ 3.6V (C21B series: 1.8V ~ 3.6V)
Low Current Consumption : Stand-by function included 
                                       : 30μA (MAX.) when stand-by
Chip Form (size) : 800×1200μm

Packages: SOT-26 , DIE

PropertyXC2165XC2165XC2165XC2165
Min Input Frequency (MHz)N/AN/AN/AN/A
Max Input Frequency (MHz)N/AN/AN/AN/A
Min Oscillation Frequency (MHz)8888
Max Oscillation Frequency (MHz)120120120120
Min Operating Voltage (V)1.51.51.51.5
Typ Operating Voltage (V)N/AN/AN/AN/A
Max Operating Voltage (V)3.63.63.63.6
Min Internal Divider Ratio (f0/)1248
Max Internal Divider Ratio (f0/)1248
Min Internal Multiplier Ratio (f0 x)N/AN/AN/AN/A
Max Internal Multiplier Ratio (f0 x)N/AN/AN/AN/A
Output3 state3 state3 state3 state
TypeBufferDividerDividerDivider
CommentsICs for use with low voltage crystal oscillatorsICs for use with low voltage crystal oscillatorsICs for use with low voltage crystal oscillatorsICs for use with low voltage crystal oscillators
PackageSOT-26, DIESOT-26, DIESOT-26, DIESOT-26, DIE